QIAsymphony DSP AXpH DNA Kit

For automated isolation and purification of DNA from liquid-based cytology media

Features

  • Novel, prefilled reagent cartridges for ease of use
  • High reproducibility through standardized processing
  • Continuous loading of up to 96 samples per run
  • Bar codes enable tracking of samples and reagents

Product Details

The QIAsymphony DSP AXpH DNA Kit, in combination with the QIAsymphony SP, enables automated DNA purification from liquid-based cytology media for in vitro diagnostic use. Optimized protocols provide DNA eluates that are ready to use in downstream applications. Novel, prefilled reagent cartridges reduce setup time and minimize manual handling. Bar code reading enables full tracking of reagents. The QIAsymphony SP performs all steps of the sample preparation procedure. Up to 96 samples, in batches of up to 24, are processed in a single run.

Principle

QIAsymphony DSP AXpH technology combines the speed and efficiency of pH-driven anion exchange chromatography with the convenient handling of magnetic particles (see " Schematic of the QIAsymphony SP principle"). Innovative, ready-to-run reagent cartridges are prefilled with all reagents required for the purification procedure and are automatically opened by the QIAsymphony SP, which helps to minimize the risk of environmental contamination.
See figures

Procedure

The purification procedure is designed to ensure safe and reproducible handling of potentially infectious samples, and comprises 4 steps: lyse, bind, wash, and elute (see " QIAsymphony DSP AXpH procedure"). Worktable setup is rapid, which saves valuable time. Simply place up to 2 reagent cartridges in the consumables drawer. The reagent cartridges can be either from the same kit or from different kits, enabling different purification procedures to be performed within the same run of 96 samples. Reagent volumes only for the selected number of samples are used, allowing complete cost control.

Protocols for use with the QIAsymphony DSP AXpH DNA Kit
ProtocolSample type Volume processed
AXpH2000_DSP PreservCyt samples 2 ml
SP2000_DSP Diluted SurePath postgradient samples 2 ml

See figures

Applications

The QIAsymphony DSP AXpH DNA Kit in combination with the QIAsymphony SP enables purification of DNA from liquid-based cytology samples, such as cervical swabs collected in SurePath (BD) or PreservCyt (Cytyc/Hologic) media.

Supporting data and figures

Resources

Application/Protocol Documents (4)
For use with software version 4.0 and higher
(EN) - SP2000_V2_DSP
PDF (804KB)
For use with software version 4.0 or higher
For use with software version 4.0 or higher 
For use with software version 4.0 or higher 

FAQ

How much starting material can be used with the QIAsymphony DSP DNA Mini Kit on the QIAsymphony SP?

Tissue: If no information about the expected yield is available, we recommend starting with 25 mg sample material. Depending on the yield obtained, the sample size can be increased in subsequent preparations to a maximum of 50 mg.

FFPE: Up to 4 sections, each with a thickness of up to 10 µm, or 8 sections with a thickness of up to 5 µm and a surface area of up to 250 mm2, can be combined in one preparation.

FAQ ID -2927