text.skipToContent text.skipToNavigation

QIAstat-Dx Respiratory SARS-CoV-2 Panel

For multiplex syndromic testing applications
  • QIAstat-Dx Respiratory SARS-CoV-2 Panel is authorized by FDA under an Emergency Use Authorization (EUA)
  • Enables detection of the SARS-CoV-2 virus that causes COVID-19 in addition to 20 other respiratory pathogens
  • Intuitive workflow with less than one-minute hands-on time
  • All wet and dry reagents onboard and room temperature stable
  • Comprehensive qualitative results available in about an hour

To support the efforts for acessible testing to meet the demands of the COVID-19 outbreak, QIAGEN developed the QIAstat-Dx Respiratory SARS-CoV-2 Panel. This version of our multiplex syndromic cartridge detects and differentiates* 21 respiratory targets, including SARS-CoV-2 from nasopharyngeal swabs (NPS) eluted in universal transport media (UTM).

The QIAstat-Dx Analyzer, combined with QIAstat-Dx assay cartridges, uses real-time PCR to detect pathogen nucleic acids in human biological samples. The QIAstat-Dx Analyzer and cartridges are designed as a closed system that contains on board all necessary reagents, enabling hands-off sample preparation. Detected real-time amplification signals are interpreted by the integrated software and are reported via an intuitive user interface.

The QIAstat-Dx Respiratory SARS-CoV-2 Panel is for in vitro diagnostic use under Emergency Use Authorization (EUA) only. Testing is limited to laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. §263a, to perform high complexity and moderate complexity tests.

The QIAstat-Dx Respiratory SARS-CoV-2 Panel has not been FDA cleared or approved;

The QIAstat-Dx Respiratory SARS-CoV-2 Panel has been authorized by FDA under an EUA for use by authorized laboratories;

The QIAstat-Dx Respiratory SARS-CoV-2 Panel has been authorized only for the detection and differentiation of nucleic acid of SARS-CoV-2 from multiple respiratory viral and bacterial organisms; and

The QIAstat-Dx Respiratory SARS-CoV-2 Panel is only authorized for the duration of the declaration that circumstances exist justifying the authorization of emergency use of in vitro diagnostic tests for detection and/or diagnosis of COVID-19 under Section 564(b)(1) of the Act, 21 U.S.C. § 360bbb-3(b)(1), unless the authorization is terminated or revoked sooner.

 

* Enterovirus and Rhinovirus are both detected, but not differentiated, with the QIAstat-Dx® Respiratory SARS-CoV-2 Panel.

Buy Products

Cat No./ID: 691223
QIAstat Respiratory SARS-CoV-2 Panel

The QIAstat-Dx Respiratory SARS-CoV-2 Panel is for in vitro diagnostic use under Emergency Use Authorization (EUA) only. Testing is limited to laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. §263a, to perform high complexity and moderate complexity tests.

Cat No./ID: 9002813
QIAstat-Dx Operational Module
Module enables interaction with the QIAstat-Dx Analyzer.
Cat No./ID: 9002814
QIAstat-Dx Analytical Module
Module contains the hardware and software for sample testing and analysis.
Cat No./ID: 9002824
QIAstat-Dx Analyzer
Instrument consists of both the Operational Module and Analytical Module.

The QIAstat-Dx Respiratory SARS-CoV-2 Panel is for in vitro diagnostic use under Emergency Use Authorization (EUA) only. Testing is limited to laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. §263a, to perform high complexity and moderate complexity tests.


Product Details

Performance

The Limit of Detection (LOD) value obtained for the SARS-CoV-2 target tested with the QIAstat-Dx Respiratory SARS-CoV-2 Panel.

Pathogen Strain Source Concentration Detection rate
SARS-CoV-2 Clinical Sample Hospital from Barcelona, Spain 500 copies/mL 20/20

 

The performance of SARS-CoV-2 target in the QIAstat-Dx Respiratory SARS-CoV-2 Panel was evaluated using retrospective nasopharyngeal swab clinical specimens in transport medium.

                                                                        SARS-CoV-2 Targets
Sample Sample type N % positive (95% Cl) % Negative (95%Cl)
Positives Positive clinical sample 10 (10/10) 100% N/A 0/0

N/A

  Low positive contrived sample (1x–2x LOD) 20 (20/20) 100% N/A 0/0 N/A
  Total Positive Samples 30 (30/30) 100% 85.8–100% 0/0 N/A
Negative Total Negative Samples 30 (30/30) 100% N/A (30/30) 100% 85.8–100%

 

Principle

QIAstat-Dx Respiratory SARS-CoV-2 Panel Intended Use

The QIAstat-Dx Respiratory SARS-CoV-2 Panel is a multiplexed nucleic acid real-time PCR test intended for the qualitative detection and differentiation of nucleic acid from multiple respiratory viral and bacterial organisms, including the SARS-CoV-2 virus, in nasopharyngeal swabs (NPS) eluted in universal transport media collected from patients suspected of COVID 19 by their healthcare provider. Testing is limited to laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. §263a, to perform high complexity and moderate complexity tests.

The QIAstat-Dx Respiratory SARS-CoV-2 Panel is intended for the detection and differentiation of nucleic acid from SARS-CoV-2 and the following organism types and subtypes: Adenovirus, Coronavirus 229E, Coronavirus HKU1, Coronavirus NL63, Coronavirus OC43, SARS-CoV-2, Human Metapneumovirus A+B, Influenza A, Influenza A H1, Influenza A H3, Influenza A H1N1/pdm09, Influenza B, Parainfluenza virus 1, Parainfluenza virus 2, Parainfluenza virus 3, Parainfluenza virus 4, Rhinovirus/Enterovirus, Respiratory Syncytial Virus A+B, Bordetella pertussis, Chlamydophila pneumoniae, and Mycoplasma pneumoniae.

SARS-CoV-2 RNA and nucleic acids from the other respiratory viral and bacterial organisms identified by this test are generally detectable in nasopharyngeal swabs (NPS) during the acute phase of infection. Positive results are indicative of the presence of the identified microorganism, but do not rule out co-infection with other pathogens not detected by the test, or lower respiratory tract infection that is not detected by a nasopharyngeal swab. The agent detected may not be the definite cause of disease. 

For SARS-CoV-2 positive specimens; clinical correlation with patient history and other diagnostic information is necessary to determine patient infection status. Laboratories within the United States and its territories are required to report all SARS-CoV-2 positive results to the appropriate public health authorities.

Negative results do not preclude SARS-CoV-2 infection and should not be used as the sole basis for treatment or other patient management decisions. Negative SARS-CoV-2 results must be combined with clinical observations, patient history, and epidemiological information. Negative results for other organisms identified by the test may require additional laboratory testing (eg, bacterial and viral culture, immunofluorescence and radiography) when evaluating a patient with possible respiratory tract infection.

Testing with the QIAstat Dx Respiratory SARS-CoV-2 Panel is intended for use by qualified and trained operators who are proficient in performing the tests using the QIAstat Dx Analyzer System. The QIAstat Dx Respiratory SARS-CoV-2 Panel is only for use under the Food and Drug Administration’s Emergency Use Authorization.

Product Resources

fragment fix placeholder