Cat. No. / ID: 9002345
Cat. No. / ID: 9002344
Cat. No. / ID: 990392
Cat. No. / ID: 990394
Cat. No. / ID: 990352
Cat. No. / ID: 990332
Cat. No. / ID: 990452
Cat. No. / ID: 9243848
Cat. No. / ID: 9243846
Cat. No. / ID: 9243850A
Yes. The heated shaker on the QIAcube Connect can be operated independently if the QIAcube is not performing a protocol run. For instructions on how to operate the shaker, refer to the QIAcube Connect User Manual, chapter 5 "Operating Procedures", section 5.9 "Independent heater/shaker operation".
The shaker can be used to heat and shake samples simultaneously, shake samples without heating, or heat samples without shaking.
Yes. The QIAcube Connect centrifuge can be operated independently if the QIAcube Connect is not performing a protocol run. For instructions on how to operate the centrifuge, refer to the QIAcube Connect User Manual, chapter 5 "Operating Procedures", section 5.8 "Operating the Centrifuge".
Yes, this is absolutely necessary. If the lids are not securely fixed in the rotor adapter slots during processing on the QIAcube, they will become detached from the elution tubes and columns during centrifugation and will collect at the bottom of the centrifuge chamber.
The following disinfectants and detergents are recommended for cleaning the QIAcube:
Lysetol® AF (Gigsept® Instru AF) (Schülke & Mayr GmbH) — disinfectant for submerging worktable items (consists of 14 g cocospropylene-diamine-guanidine diacetate, 35 g phenoxypropanols, and 2.5 g benzalkonium chloride per 100 g Lysetol AF, with anticorrosion components, fragrance, and 15–30% nonionic surfactants).
DECON-QUAT® 100 (Veltek Associates, Inc.) — quaternary ammonium salt based disinfectant concentrate for submerging worktable items (contains 5% alkyldimethylbenzylammonium chloride and 5% alkyldimethylethylbenzylammonium chloride).
Note: If you want to use disinfectants different from those recommended, ensure that their compositions are similar to those described above.
No. The QIAcube is designed for fully automated processing of up to 12 samples using QIAGEN spin-column kits. Do not use spin columns manufactured by other suppliers with the QIAcube. Damage caused by use of other types of spin columns will void the instrument warranty.
See: http://www.qiagen.com/products/catalogpagecontrols/header/qiacube/360/default.aspx for a demonstration on how the QIAcube is used with the RNeasy Mini Kit for automated purification of RNA.
The QIAcube has the following weight and dimensions:
Please refer to section 6.5 'Decontaminating the QIAcube' in chapter 6 'Maintenance Procedures' of the QIAcube User Manual.
You can stop a QIAcube protocol if there is an emergency by pressing “Cancel”. To confirm that you want to stop the protocol run, press “OK”. To cancel the 'stop protocol' command, press “Cancel”.
Note: If a protocol run is stopped, the run cannot be restarted. The samples must be processed manually. The last protocol step performed by the QIAcube will be displayed in the touch screen. For more information, refer to the QIAcube User Manual.
The corresponding manual kits can be used for all available protocols on the QIAcube. The manual kits contain sufficient buffers and reagents to process the number of spin columns provided with the kit.
In addition to the purification kit, Rotor Adapters (10 x 24), cat. no 990394, and the required disposable tips:
need to be ordered separately. To find out which filter-tips are required for a specific application, refer to the corresponding protocol sheet.
No. The QIAcube is equipped with an optical sensor, which determines the tip size and the number of tips loaded onto the worktable prior to starting a run.
The QIAcube can use partially used tip racks from previous runs, provided that the racks contain sufficient tips to process the number of samples loaded for the current run.