Download the latest version of BioCalculator software. Make sure to unzip the folder before installation.
Download the documentation that describes how to install the BioCalculator Software and read through the procedure carefully.
Size marker file for use with BioCalculator 3.2 software
Size marker file for use with BioCalculator 3.2 software
Size marker file for use with BioCalculator 3.2 software
Size marker file for use with BioCalculator 3.2 software
Size marker file for use with BioCalculator 3.2 software
Files for upgrading existing PyroMark Q24 instruments to firmware 1.5.6903
This tool converts Pyrosequencing runs set up and completed with PyroMark Q96 ID Software into a file format that is compatible with PyroMark Q96 2.5 Software
Configuration protocol to be used with the DNeasy 96 PowerSoil Pro QIAcube HT Kit. Intended for use with the QIAcube HT Prep Manager 1.0 software or higher.
QIAcube HT instrument operating software. We recommend installing the new improved QIAcube HT Prep Manager Software, which offers a state-of-the-art user-interface and a wizard-guided experimental setup for quick and easy purification experiments.
Important: It is not possible to install both QIAcube HT Operating Software 4.17 and QIAcube HT Prep Manager Software on the same computer. Please uninstall Prep Manager Software before installing QIAcube HT Operating Software 4.17. For more information, contact QIAGEN Technical Services.
This release includes the first version of QIAxcel ScreenGel NGS Profiles. These profiles are intended to be used to run and analyze reactions of GeneRead QIAact AIT and BRCA 1/2 panels using the QIAxcel instrument and QIAxcel ScreenGel 1.5 Software.
These profiles are composed of an Process Profile, Analysis Profile, Distribution Profile, and Report/Export Profile.
Instrument operating software designed for flexible use in various applications. Use this software for all applications other than gene expression and pathogen detection.
For gene expression and pathogen detection applications, we recommend using the QIAgility Setup Manager Software.
Important: It is not possible to install both QIAgility Operating Software 4.17.1 and QIAgility Setup Manager Software on the same computer. Please uninstall QIAgility Setup Manager Software before installing QIAgility Operating Software 4.17.1. For more information, contact QIAGEN Technical Services.
Note: QIAgility Operating Software is not compatible with CAS-1200 instruments. Download the latest CAS-1200 operating software.
For use with the QIAstat-Dx Analyzer and the DiagCORE Analyzer
For use with the QIAstat-Dx Analyzer and the DiagCORE Analyzer
Gamma Plug-in for use with Rotor-Gene AssayManager v2.1
Version 2.0
The QIAcuity Software Suite 2.0 is designed to be installed on a Windows PC that is connected to one or more QIAcuity instruments. The QIAcuity Software Suite enables the user to set up plates, analyze results, and monitor the status of runs in real time. For this configuration, the QIAcuity instrument needs to be connected to a network through Ethernet. Alternatively, a direct cable connection between the QIAcuity and the notebook where the QIAcuity Software Suite is running needs to be established. When connected to a network, up to 10 users may access the QIAcuity Software Suite via a browser installed on the client PC (Windows or Mac).
This new software version now supports 21 CFR Part 11 regulations for users working under GMP. This includes the following:
-Advanced User Management
-Audit Trail
-Signatures
Additional changes compared with the previous software version include the following:
-Usability improvements
-Improved dust detection
-Hyperwell expansion to CNV and GEX analysis
-CSV export functionality of multiple positive partitions for linkage analysis, drop-off assays, etc.
-Raw data export
Detailed information is available in the Release Note, which can also be downloaded under section “Operating Software”.
Important: A direct update of the Software Suite from version 1.1.3 to 2.0.20 is not possible. Please follow the instructions in the User Manual on how to update to version 1.2.18 first before updating the Software Suite to version 2.0.20.
Before you start upgrading to version 1.1.3, please make sure that all plates are imported and visible in the plate overview of the QIAcuity Software Suite.
Caution: Not following the instructions may result in a loss of your previous plate data!
Please contact QIAGEN Technical Services if you are unsure and require technical support.
SHA1 checksum: C60C4EEC349DF1C037796016D32A93EEC19B54A0
Release of QIAxpert Instrument Software v 2.4.3.101. This release includes the latest versions of the following Apps: DNA QIAamp, DNA QIAsymphony, DNA Mammalian, DNA Plant, PCR QIAquick, Purified PCR, RNA RNeasy, RNA, PAXgene RNA, RNA FFPE, A260 dsDNA, A260 RNA, A260 ssDNA, A280 Protein, UV/Vis and OD check.
For software installation instructions, please refer to the QIAxpert User Manual, chapter Tools – Upgrading the QIAxpert Software.
For use on the Rotor-Gene Q. Rotor-Gene Q software 2.3.5 is compatible with Windows 7 and Windows 10 operating systems.
The QIAquant 96 Touch Software Updater can be used to update the integrated software on your QIAquant 96 instrument to version 1.0.3.
Note: Please follow the instructions provided in the QIAquant 96 Touch Software User Manual. When updating the QIAquant 96 Touch Software, the desktop version of the QIAquant 96 Software also needs to be updated to the latest version (1.0.3). For instructions, refer to the QIAquant 96 Software User Manual.
The QIAquant 384 Software can be used to create, perform, and analyze real-time PCR experiments with the QIAquant 384 instrument.
The QIAquant 96 Software can be used to create, perform, and analyze real-time PCR experiments with the QIAquant 96 instrument.
Note: When updating the QIAquant 96 Software from version 1.0.1 to version 1.0.3, the QIAquant 96 Touch Software on your QIAquant 96 instrument also needs to be updated to latest software version (1.0.3). For instructions, refer to the QIAquant 96 Touch Software User Manual.
|