HotStarTaq Plus DNA Polymerase
For fast and highly specific amplification in all applications
- High PCR specificity with minimal optimization
- Fast 5-minute enzyme activation time
- Ready-to-load PCR buffer for faster and easier handling
The polymerase combines the high specificity, sensitivity, and minimal optimization of HotStarTaq DNA Polymerase, with a fast 5-minute activation time. PCR can be set up at room temperature and reactions can be directly loaded onto a gel, due to novel CoralLoad PCR Buffer, which contains two gel-tracking dyes. The standard QIAGEN PCR Buffer is also included for greater convenience. In addition, Q-Solution, a novel additive that enables efficient amplification of "difficult" (e.g., GC rich) templates, is also provided. The unique kit components and optimized protocols streamline the PCR procedure.
zh-SG
Configure
Added to your shopping cart
|
製品名
|
Product no.
|
Cat. no.
|
List price:
|
|
|
This product has been discontinued.
Instead, we recommend
|
|
詳細表示
|
|
|
varies
|
select
Can't order online?
To place an order via phone, email or for requesting a quote, please provide the product’s name, number and catalog number.
|
|
|
|
製品名
|
Cat. no.
|
List price:
|
|
|
HotStarTaq Plus DNA Polymerase (250)
250 units HotStarTaq Plus DNA Polymerase, 10x PCR Buffer, 10x CoralLoad PCR Buffer, 5x Q-Solution, 25 mM MgCl2
|
203603
|
|
|
|
HotStarTaq Plus DNA Polymerase (1000)
1000 units HotStarTaq Plus DNA Polymerase, 10x PCR Buffer, 10x CoralLoad PCR Buffer, 5x Q-Solution, 25 mM MgCl2
|
203605
|
|
|
|
HotStarTaq Plus DNA Polymerase (5000)
5000 units HotStarTaq Plus DNA Polymerase, 10x PCR Buffer, 10x CoralLoad PCR Buffer, 5x Q-Solution, 25 mM MgCl2
|
203607
|
|
|
HotStarTaq Plus DNA Polymerase は分子生物学実験用です。疾病の診断、治療または予防の目的には使用することはできません。
CoralLoad PCR Buffer|HotStarTaq Plus操作手順|最高の特異性|増幅困難なテンプレートを増幅|異なるプライマー/テンプレートシステムにおける高特異性|RT-PCR におけるホットスタートの効果|シングルセルで高感度なPCR|プライマーのアニーリングにおける特異性が増加|
[A] マーカー色素を含むCoralLoad PCR Buffer。 [B] CoralLoad PCR Bufferを用いるとPCR溶液をゲルに直接ロードできDNAの移動を簡単に認識できる。|HotStarTaq Plus 操作手順は迅速かつ容易で最高の使いやすさを実現します。|QIAGEN HotStarTaq Plus DNA Polymerase、HotStarTaq DNA Polymerase、Taq DNA Polymeraseおよび表記メーカーのホットスタートPCR酵素3種類を用いてPCRを行なった。50 ngのヒトゲノムDNAを用いて、メーカーの推奨する方法で反応を同時に行なった。ヒトCFTR遺伝子の1.5 kbフラグメントを35 PCRサイクルで増幅した。M:マーカー。|2種類のプライマー/テンプレートシステムにおいて1x Q-Solutionの非存在下(–)、あるいは存在下(+)でQIAGEN PCR BufferとTaq DNA DNA Polymeraseを用いて増幅した。Q-Solutionは増幅困難なテンプレートの特異性の高い増幅を実現。[A] ヒトアンジオテンシンレセプターII遺伝子、[B] マウスプロテインキナーゼC遺伝子、M:マーカー。|3種類の異なるプライマー/テンプレートシステムでR社のTaq DNA polymerase(R)、あるいはHotStarTaq DNA Polymerase (H)を用い、同じ条件下でPCRを行った。システム 1:ヒトゲノムDNAからD-IgIの1.1 kbのフラグメントを増幅した。システム 2:ヒトゲノムDNAからX連鎖性若年性網膜分離症に関与している領域の296 bpのフラグメントを増幅した。システム 3:トータルRNAより合成されたcDNAからβ-アクチンの214 bpのフラグメントを増幅した。M:マーカー。注:HotStarTaq DNA Polymeraseのデータを示す。 同じ感度および特異性がHotStarTaq Plus DNA Polymeraseを用いて得られた。|ヒト・インターロイキン1レセプター(タイプII)遺伝子の1.1 kbフラグメントをcDNAから増幅した。増幅反応は以下の組み合わせで3セット調製した。 L社のTaq DNA polymeraseとバッファー(No hot start);L社の抗体修飾した酵素とバッファー(抗体利用);QIAGENのHotStarTaq DNA PolymeraseとPCR Buffer(HotStarTaq)。M:マーカー。注:HotStarTaq DNA Polymeraseのデータを示す。 同等の感度および特異性がHotStarTaq Plus DNA Polymeraseを用いて得られた。|フローサイトメトリ-を用いて直接各PCRチューブに分離した1個の細胞からマウスp53 遺伝子の500 bp フラグメントを増幅した。各反応は以下の組み合わせで行なった:QIAGENのHotStarTaq DNA PolymeraseとPCR Buffer(HotStarTaq)、AII社のホットスタート酵素とバッファー(Hot-start enzyme)、L社の抗体修飾した酵素とバッファー(抗体利用)。M:マーカー。注:HotStarTaq DNA Polymeraseのデータを示す。 同等の感度および特異性がHotStarTaq Plus DNA Polymeraseを用いて得られた。|QIAGEN PCRバッファー中のアンモニウムイオンとカリウムイオンにより、プライマーのアニーリングにおける特異性が増加。K+ はDNA バックボーンのリン酸基(P–)に結合し、テンプレートへのプライマー·アニーリングを安定化する。サーマルサイクリング条件下では、アンモニウムイオンおよびアンモニアの両方として存在するNH4+は、塩基(B)間の水素結合に相互作用するため、ミスマッチの塩基間の水素結合を不安定にする。これら2 種類の陽イオンの組み合わせ効果により、幅広い温度範囲において非特異的なプライマー·テンプレート結合に対して特異的な結合の比率が高く保たれる。|
パフォーマンス
Each lot of HotStarTaq Plus DNA Polymerase is subjected to a comprehensive range of quality control tests, including a stringent PCR specificity and reproducibility assay in which low-copy targets are amplified. HotStarTaq Plus DNA Polymerase outperformed kits tested from other suppliers and ensures high specificity and superior performance in hot-start PCR (see figures " Highest specificity" and " Higher specificity with different primer–template systems", and table). The innovative PCR buffer provided with the kit ensures specificity over a wide range of PCR conditions, minimizing the need for optimization. Suboptimal PCR can be improved with Q-Solution, also provided with the kit (see figure " Amplification of difficult templates"). Together, these components ensure specific amplification in a range of applications (see figure " Effect of hot start on RT-PCR performance" and " Highly sensitive single-cell PCR").
| Specific amplification |
++ |
++ |
+ |
++ |
+ |
+/– |
+/– |
| Minimal PCR optimization |
++ |
++ |
+/– |
+/– |
+/– |
– |
– |
| Easy to use |
+++ |
++ |
++ |
+ |
+ |
– |
– |
| Speed of activation |
++ |
+ |
++ |
++ |
++ |
– |
– |
HotStarTaq Plus DNA Polymerase specifications
Concentration: 5 units/µl
Recombinant enzyme: Yes
Substrate analogs: dNTP, ddNTP, dUTP, biotin-11-dUTP, DIG-11-dUTP, fluorescent-dNTP/ddNTP
Extension rate: 2–4 kb/min at 72°C
Half-life: 10 min at 97°C ; 60 min at 94°C
Amplification efficiency: ≥105 fold
5'–>3' exonuclease activity: Yes
Extra A addition: Yes
3'–>5' exonuclease activity: No
Contaminating nucleases: No
Contaminating RNases: No
Contaminating proteases: No
Self-priming activity: No
原理
HotStarTaq Plus DNA Polymerase provides the unrivaled performance of HotStarTaq DNA Polymerase with a shortened activation time of just 5 minutes.
HotStarTaq Plus DNA Polymerase, a modified form of QIAGEN Taq DNA Polymerase, is supplied in an inactive state that has no polymerase activity at ambient temperatures. This prevents extension of nonspecifically annealed primers and primer dimers formed at low temperatures during PCR setup and the initial PCR cycle (see figures "Highest specificity" and "Higher specificity with different primer-template systems"). HotStarTaq Plus DNA Polymerase is activated by a short 5-minute incubation at 95°C which can be easily incorporated into any existing thermal-cycler program.
QIAGEN PCR Buffer
QIAGEN PCR Buffer maintains specific amplification in every cycle of PCR by promoting a high ratio of specific-to-nonspecific primer binding during the annealing step in each PCR cycle (see figure "Increased specificity of primer annealing"). Owing to a uniquely balanced combination of KCl and (NH4)2SO4, the buffer provides stringent primer-annealing conditions over a wider range of annealing temperatures and Mg2+ concentrations than conventional PCR buffers. Optimization of PCR by varying the annealing temperature or the Mg2+ concentration is therefore often minimal or not required.
CoralLoad PCR Buffer
HotStarTaq Plus DNA Polymerase is supplied with CoralLoad PCR Buffer, which has all of the advantages of QIAGEN PCR Buffer but can also be used to directly load the PCR reaction onto an agarose gel without the need to add a gel loading buffer. CoralLoad PCR Buffer provides the same high PCR specificity and minimal reaction optimization as the conventional QIAGEN PCR Buffer. Additionally, it contains two marker dyes — an orange dye and a red dye — that facilitate estimation of DNA migration distance and optimization of agarose gel run time (see figure "CoralLoad PCR Buffer"). The buffer ensures improved pipetting visibility and enables direct loading of PCR products onto a gel, for enhanced convenience.
Q-Solution
Q-Solution, an innovative PCR additive that facilitates amplification of difficult templates by modifying the melting behavior of DNA, is also provided with HotStarTaq DNA Polymerase. This unique reagent improves suboptimal PCR caused by templates that have a high degree of secondary structure or GC-rich templates (see figure "Amplification of difficult templates"). Unlike other commonly used PCR additives such as DMSO, Q-Solution is used at just one working concentration, is nontoxic, and PCR purity is guaranteed. Adding Q-Solution to the PCR does not compromise PCR fidelity.
操作手順
HotStarTaq Plus DNA Polymerase is supplied with a streamlined, optimized protocol for fast and easy PCR setup. HotStarTaq Plus DNA Polymerase is activated by a 5-minute, 95°C incubation step, which can easily be incorporated into existing thermal cycling programs. Reactions can be set up at room temperature, ensuring greater convenience and ease of use (see figure " HotStarTaq Plus procedure"). CoralLoad PCR Buffer, also provided with the kit, ensures improved pipetting visibility and enables direct loading of PCR products onto a gel for enhanced convenience.
アプリケーション
HotStarTaq Plus DNA Polymerase is highly suitable for a wide variety of applications, including challenging applications such as amplification of:
- Complex genomic templates
- Complex cDNA templates (e.g., RT-PCR)
- Very low-copy targets (e.g., single-cell PCR)
- Reactions with multiple primer pairs
|
Feature
|
Specifications
|
|
Applications
|
PCR, RT-PCR, Complex genomic templates, very low-copy targets
|
|
Enzyme activity
|
5' -> 3' exonuclease activity
|
|
Mastermix
|
No
|
|
Reaction type
|
PCR amplification
|
|
Real-time or endpoint
|
Endpoint
|
|
Sample/target type
|
Genomic DNA and cDNA
|
|
Single or multiplex
|
Single
|
|
With/without hotstart
|
With hotstart
|
|
|
|
|
Second edition — innovative tools
|
詳細を表示
|
|
|
Addressing critical factors and new solutions
|
詳細を表示
|
|
|
|
|
FAQ ID -165
|
表示
|
|
|
FAQ ID -1047
|
表示
|
|
|
FAQ ID -1050
|
表示
|
|
|
FAQ ID -1051
|
表示
|
|
|
FAQ ID -1052
|
表示
|
|
|
FAQ ID -1449
|
表示
|
|
|
FAQ ID -1644
|
表示
|
|
|
FAQ ID -380
|
表示
|
|
|
FAQ ID -961
|
表示
|
|
|
|
|
For highly specific hot-start PCR without optimization
|
詳細を表示
|
画像
CoralLoad PCR Buffer
[A] マーカー色素を含むCoralLoad PCR Buffer。 [B] CoralLoad PCR Bufferを用いるとPCR溶液をゲルに直接ロードできDNAの移動を簡単に認識できる。
HotStarTaq Plus操作手順
HotStarTaq Plus 操作手順は迅速かつ容易で最高の使いやすさを実現します。
最高の特異性
QIAGEN HotStarTaq Plus DNA Polymerase、HotStarTaq DNA Polymerase、Taq DNA Polymeraseおよび表記メーカーのホットスタートPCR酵素3種類を用いてPCRを行なった。50 ngのヒトゲノムDNAを用いて、メーカーの推奨する方法で反応を同時に行なった。ヒトCFTR遺伝子の1.5 kbフラグメントを35 PCRサイクルで増幅した。M:マーカー。
増幅困難なテンプレートを増幅
2種類のプライマー/テンプレートシステムにおいて1x Q-Solutionの非存在下(–)、あるいは存在下(+)でQIAGEN PCR BufferとTaq DNA DNA Polymeraseを用いて増幅した。Q-Solutionは増幅困難なテンプレートの特異性の高い増幅を実現。[A] ヒトアンジオテンシンレセプターII遺伝子、[B] マウスプロテインキナーゼC遺伝子、M:マーカー。
異なるプライマー/テンプレートシステムにおける高特異性
3種類の異なるプライマー/テンプレートシステムでR社のTaq DNA polymerase(R)、あるいはHotStarTaq DNA Polymerase (H)を用い、同じ条件下でPCRを行った。システム 1:ヒトゲノムDNAからD-IgIの1.1 kbのフラグメントを増幅した。システム 2:ヒトゲノムDNAからX連鎖性若年性網膜分離症に関与している領域の296 bpのフラグメントを増幅した。システム 3:トータルRNAより合成されたcDNAからβ-アクチンの214 bpのフラグメントを増幅した。M:マーカー。注:HotStarTaq DNA Polymeraseのデータを示す。 同じ感度および特異性がHotStarTaq Plus DNA Polymeraseを用いて得られた。
RT-PCR におけるホットスタートの効果
ヒト・インターロイキン1レセプター(タイプII)遺伝子の1.1 kbフラグメントをcDNAから増幅した。増幅反応は以下の組み合わせで3セット調製した。 L社のTaq DNA polymeraseとバッファー(No hot start);L社の抗体修飾した酵素とバッファー(抗体利用);QIAGENのHotStarTaq DNA PolymeraseとPCR Buffer(HotStarTaq)。M:マーカー。注:HotStarTaq DNA Polymeraseのデータを示す。 同等の感度および特異性がHotStarTaq Plus DNA Polymeraseを用いて得られた。
シングルセルで高感度なPCR
フローサイトメトリ-を用いて直接各PCRチューブに分離した1個の細胞からマウスp53 遺伝子の500 bp フラグメントを増幅した。各反応は以下の組み合わせで行なった:QIAGENのHotStarTaq DNA PolymeraseとPCR Buffer(HotStarTaq)、AII社のホットスタート酵素とバッファー(Hot-start enzyme)、L社の抗体修飾した酵素とバッファー(抗体利用)。M:マーカー。注:HotStarTaq DNA Polymeraseのデータを示す。 同等の感度および特異性がHotStarTaq Plus DNA Polymeraseを用いて得られた。
プライマーのアニーリングにおける特異性が増加
QIAGEN PCRバッファー中のアンモニウムイオンとカリウムイオンにより、プライマーのアニーリングにおける特異性が増加。K+ はDNA バックボーンのリン酸基(P–)に結合し、テンプレートへのプライマー·アニーリングを安定化する。サーマルサイクリング条件下では、アンモニウムイオンおよびアンモニアの両方として存在するNH4+は、塩基(B)間の水素結合に相互作用するため、ミスマッチの塩基間の水素結合を不安定にする。これら2 種類の陽イオンの組み合わせ効果により、幅広い温度範囲において非特異的なプライマー·テンプレート結合に対して特異的な結合の比率が高く保たれる。
|