text.skipToContent text.skipToNavigation

QuantiTect Probe RT-PCR Kit

For one-step qRT-PCR using sequence-specific probes for gene expression analysis

  • Highly sensitive detection of low-copy targets
  • Accurate quantification over several logs of template
  • Use of any sequence-specific probe on any real-time cycler
  • No need to optimize reaction and cycling conditions

QuantiTect Probe RT-PCR Kits enable sensitive quantification of RNA targets by real-time one-step PCR using sequence-specific probes. The combination of a hot start and a unique PCR buffer system in the ready-to-use master mix ensures highly sensitive qRT-PCR on any real-time cycler without the need for optimization. The dNTP mix includes dUTP, allowing optional treatment with UNG. For convenience, the master mix can be stored at 2–8°C.

Cat No./ID: 204443
QuantiTect Probe RT-PCR Kit (200)
$794.00
Add To Cart
For 200 x 50 µl reactions: 3 x 1.7 ml 2x QuantiTect Probe RT-PCR Master Mix, 100 µl QuantiTect RT Mix, 2 x 2 ml RNase-Free Water
Cat No./ID: 204445
QuantiTect Probe RT-PCR Kit (1000)
$3,175.00
Add To Cart
For 1000 x 50 µl reactions: 25 ml 2x QuantiTect Probe RT-PCR Master Mix, 0.5 ml QuantiTect RT Mix, 20 ml RNase-Free Water
The QuantiTect Probe RT-PCR Kit is intended for molecular biology applications. This product is not intended for the diagnosis, prevention, or treatment of a disease.

See trademarks.


2
High sensitivity and efficiency, and a wide dynamic range.

Tenfold serial dilutions of HeLa cell RNA (100 ng to 1 pg) were analyzed in duplicate on the ABI PRISM 7900 using the QuantiTect Probe RT-PCR Kit with primers and a HEX labeled probe specific for human 28S rRNA. High PCR efficiency over 6 logs of template dilution was achieved.

3
One-step RT-PCR with comparable performance to two-step RT-PCR - A.

Tenfold serial dilutions of cDNA (100 ng to 1 pg) prepared from leukocytes were analyzed in duplicate on the Mx3005 using primers and a FAM labeled probe specific for IL1R2 (interleukin 1 receptor, type II). Two-step RT-PCR was performed using the QuantiTect Probe PCR Kit (PCR efficiency: 101%).

4
One-step RT-PCR with comparable performance to two-step RT-PCR - B.

Tenfold serial dilutions of RNA (100 ng to 1 pg) prepared from leukocytes were analyzed in duplicate on the Mx3005 using primers and a FAM labeled probe specific for ILR2 (interleukin 1 receptor, type II). One-step RT-PCR was performed using the QuantiTect Probe RT-PCR Kit (PCR efficiency: 104%).

Performance

The QuantiTect Probe RT-PCR Kit has a unique RT-PCR buffer that promotes highly specific annealing of primers and probes to the PCR template. It contains HotStarTaq DNA Polymerase, which provides the most stringent hot start compared with other polymerases (see figure "Highly specific amplification").

HotStarTaq DNA Polymerase and the unique composition of the RT-PCR buffer enable the QuantiTect Probe RT-PCR Kit to provide sensitive quantification of low-copy RNA targets, as well as accurate quantification over a wide linear range (see figure "High sensitivity and efficiency, and wide dynamic range"). Performing reverse transcription and PCR sequentially in the same tube does not impair sensitivity, as demonstrated by CT values that are comparable to those achieved in real-time two-step RT-PCR (see figures "One-step RT-PCR with comparable performance to two-step RT-PCR — A" and "One-step RT-PCR with comparable performance to two-step RT-PCR — B", and table).

One-step RT-PCR with comparable performance to two-step RT-PCR.
Amount of cDNA/RNAMean CT value Mean CT value
(two-step RT-PCR) (one-step RT-PCR)
100 ng 24.66 24.66
10 ng 28.15 27.84
1 ng 31.42 31.49
0.1 ng 34.80 34.56
0.01 ng 37.78 37.66
CT values from the 2 amplification plots shown in figures "One-step RT-PCR with comparable performance to two-step RT-PCR — A" and "One-step RT-PCR with comparable performance to two-step RT-PCR — B".
Principle

QuantiTect Probe RT-PCR Kits contain an optimized, ready-to-use master mix for highly specific and sensitive real-time quantification of RNA targets using sequence-specific probes. The kits are designed for use with all types of sequence-specific probes, including hydrolysis probes (e.g., TaqMan® and other dual-labeled probes), FRET probes, and Molecular Beacons. QuantiTect Probe RT-PCR Kits contain a unique PCR buffer that contains a balanced combination of K+ and NH4+ ions, which promote specific primer annealing, enabling high PCR specificity and sensitivity (see figure "Specific primer annealing"). In addition, an optimized mix of reverse transcriptases enables cDNA synthesis from a wide range of RNA template amounts, while HotStarTaq DNA Polymerase provides a stringent hot start, preventing the formation of nonspecific products.

QuantiTect Probe RT-PCR Master Mix also contains dUTP, enabling pretreatment with uracil-N-glycosylase (UNG) prior to starting PCR, which ensures that any contaminating PCR products do not affect subsequent PCR reactions.

Components of 2x QuantiTect Probe RT-PCR Kit
Component Features Benefits
HotStarTaq DNA Polymerase 15 min activation at 95ºC Set-up of qPCR reactions at room temperature
QuantiTect Probe RT-PCR Buffer Balanced combination of NH4+ and K+ ions Specific primer annealing ensures reliable PCR results
dNTP mix Includes dUTP, which partially replaces dTTP and enables optional UNG treatment of reactions Eliminates contamination from carryover of PCR products by optional UNG treatment
ROX dye For normalization of fluorescent signals on Applied Biosystems and, optionally,  Agilent instruments Precise quantification on cyclers that require ROX dye. Does not interfere with reactions on other real-time cyclers
Omniscript and Sensiscript Reverse Transcriptases Special blend of enzymes with high affinity for RNA RNA can be transcribed, even through complex secondary structures
Procedure

The QuantiTect Probe RT-PCR Kit overcomes the need for optimization of reaction conditions, which can be tedious and time-consuming. Simply add primers, probe, and RNA template to the ready-to-use RT-PCR master mix, and start the reaction (see flowchart "One-step RT-PCR"). Follow the protocol in the handbook to get fast and reliable results on any real-time cycler. If required, reactions can be pretreated with uracil-N-glycosylase (UNG) to eliminate carryover of PCR products from previous reactions. 

Applications

QuantiTect Probe RT-PCR Kits can be used for gene expression analysis of RNA targets on any real-time cycler. This includes instruments from Applied Biosystems, Bio-Rad, Cepheid, Eppendorf, Roche, and Agilent. For the Rotor-Gene Q and other Rotor-Gene cyclers, we recommend using the Rotor-Gene Probe RT-PCR Kit, which has been specially developed for fast cycling on these instruments.

Features
Specifications
Applications Real-time quantification of RNA targets
Reaction type One-step RT-PCR
Real-time or endpoint Real-time
Sample/target type RNA targets
Single or multiplex Single
SYBR Green I or sequence-specific probes Sequence-specific probes
Thermal cycler All real-time cyclers (e.g. LC, RG, ABI)
With or without ROX With ROX

You are not authorized to download the resource

FAQs (27)
FAQ ID -1056
View
FAQ ID -1066
View
FAQ ID -1085
View
FAQ ID -1086
View
FAQ ID -1438
View
FAQ ID -1441
View
FAQ ID -1446
View
FAQ ID -1447
View
FAQ ID -1451
View
FAQ ID -283
View
FAQ ID -2117
View
FAQ ID -2119
View
FAQ ID -2134
View
FAQ ID -2135
View
FAQ ID -2371
View
FAQ ID -2655
View
FAQ ID -2682
View
FAQ ID -539
View
FAQ ID -540
View
FAQ ID -542
View
FAQ ID -564
View
FAQ ID -584
View
FAQ ID -587
View
FAQ ID -589
View
FAQ ID -729
View
FAQ ID-751
View
FAQ ID -784
View
Kit Handbooks (2)
For quantitative, real-time one-step RT-PCR using sequence-specific probes
Show details
配列特異的プローブを用いたリアルタイム定量1ステップRT-PCR
Show details
fragment fix placeholder

Customers who bought these products also bought