QIAamp DSP Virus Kit

For purification of viral nucleic acids from human plasma and serum for in vitro diagnostic use

S_2225_RPA_QADSPVirus_191_s

✓ 24/7 automatic processing of online orders

✓ Knowledgeable and professional Product & Technical Support

✓ Fast and reliable (re)-ordering

QIAamp DSP Virus Kit

Cat. No. / ID:   60704

For 50 preps: QIAamp MinElute Columns, buffers, reagents, tubes, column extenders, VacConnectors
A$963.00
Log in To see your account pricing.
The QIAamp DSP Virus Kit is intended for in vitro diagnostic use.

✓ 24/7 automatic processing of online orders

✓ Knowledgeable and professional Product & Technical Support

✓ Fast and reliable (re)-ordering

Features

  • Universal purification system compatible with other IVD products
  • High-quality viral nucleic acids
  • Concentration with 20 µl or 60 µl eluates
  • Sample volumes of 500 µl
  • Rapid purification and minimal risk of cross-contamination

Product Details

The QIAamp DSP Virus Kit uses well-established and convenient QIAamp technology for simultaneous purification of viral DNA and RNA for in vitro diagnostic use.

Performance

Viral nucleic acids purified using the QIAamp DSP Virus Kit are ready to use in sensitive downstream applications, such as those based on enzymatic amplification, including PCR and RT-PCR.

Principle

The QIAamp DSP Virus Kit uses well-established and convenient QIAamp technology for simultaneous purification of viral DNA and RNA. The QIAamp silica-based membrane binds nucleic acids in the lysed sample, while the rest of the lysate is rapidly removed by vacuum pressure. The bound nucleic acids are efficiently washed to remove contaminants and then eluted in a volume of 20 µl or 60 µl.

Procedure

The QIAamp DSP Virus Kit Procedure includes the following steps: lyse, bind, wash (3x), dry spin, and elute. Viral nucleic acids are purified from plasma or serum using a vacuum manifold, such as the QIAvac 24 Plus (see flowchart, " Procedure").
See figures

Applications

Viral nucleic acids can be purified from plasma or serum samples. Samples can contain the anticoagulants citrate or EDTA, and can be either fresh, lyophilized, or frozen (provided they were not thawed and refrozen).

The QIAamp DSP Virus Kit provides purification of nucleic acids from a wide range of viruses. The kit is compatible with a wide range of upstream sample collection systems and downstream applications, and therefore can be easily integrated into diagnostic workflows.

Supporting data and figures

Specifications

FeaturesSpecifications
ApplicationsDownstream detection procedures in molecular diagnostics, such as PCR
Elution volume20 µl, 60 µl
Main sample typeSerum, plasma
CE/FDA/IVD compatibleCE/IVD
FormatSample tubes
ProcessingManual (vacuum)
Purification of total RNA, miRNA, poly A+ mRNA, DNA or proteinViral DNA, viral RNA
Sample amount500 µl
TechnologySilica technology
YieldVaries

Resources

Safety Data Sheets (1)
Brochures & Guides (1)
Certificates of Analysis (1)

Publications

Occurrence of hepatitis A virus genotype III in Germany requires the adaptation of commercially available diagnostic test systems.
Heitmann A; Laue T; Schottstedt V; Dotzauer A; Pichl L;
Transfusion; 2005; 45 (7):1097-105 2005 Jul PMID:15987353

FAQ

Does the QIAamp DSP Virus Kit require the QIAvac 24 Plus, or can I use it with my own laboratory vacuum system?
It is possible to use a general laboratory vacuum system with the QIAamp DSP Virus Kit. However, this will require validation in-house. The CE-marked QIAamp Kits have been developed, field-tested and validated with the QIAvac 24 Plus vacuum system (QIAvac 24 Plus, QIAvac Connecting System and Vacuum Pump). Using this system with the QIAamp DSP Virus Kit will avoid lengthy validation procedures for the enduser.
FAQ ID -789
What vacuum pressure should be applied using the QIAvac 24 Plus for the QIAamp DSP Virus Kit and Blood Mini Kit Protocols?

When processing samples with the QIAamp DSP DNA Blood Mini Kit and the QIAamp DSP Virus Kit, the vacuum pressure should be below -800 mbar. The QIAvac 24 Plus and the QIAvac Connecting System should be tested according to Appendix B of the QIAvac 24 Plus Handbook before performing a nucleic acid purification procedure.

If you would like to use an equivalent general laboratory vacuum system, make sure that the minimum vacuum pressure is reached. Performance of the QIAamp DSP DNA Blood Mini or Virus Kits in combination with a house-vacuum system has to be validated by the researcher.

FAQ ID -1033
What is the difference between QIAGEN Protease and QIAGEN Proteinase K provided in various QIAamp Kits?

QIAGEN Proteinase K is a subtilisin-type protease, which cleaves at the carboxyl side of hydrophobic, aliphatic and aromatic amino acids. It is particularly suitable for short digestion times. It possesses a high specific activity over a wide range of temperatures and pH values with substantially increased activity at higher temperature. Soluble calcium is not essential for enzymatic activity. This means that EDTA, which is used to inhibit Mg2+-dependent enzymes such as nucleases, will not inhibit Proteinase K activity.

QIAGEN Protease is a broad-specificity Serine protease with high activity, cleaving preferentially at neutral and acidic residues. It is an economical alternative to Proteinase K for isolation of native DNA and RNA from a variety of samples.

FAQ ID -761
What can be used as an alternative to the A260 measurement for quantification of small amounts of RNA and DNA?

Small amounts of RNA and DNA may be difficult to measure spectrophotometrically. Fluorometric measurements, or quantitative RT-PCR and PCR are more sensitive and accurate methods to quantify low amounts of RNA or DNA.

Fluorometric measurements are carried out using nucleic acid binding dyes, such as RiboGreen® RNA Quantitation Reagent for RNA, and PicoGreen® DNA Quantitation Reagent for DNA (Molecular Probes, Inc.).

FAQ ID -728
What has to be done to an RNA sample before loading it onto an Agilent Bioanalyzer?

For RNA isolated on the BioRobot EZ1 and BioRobot M48:

The RNA can be directly applied to the Agilent Bioanalyzer, since it is being denatured in the final protocol steps of these isolation procedures.

For RNA prepared with all other QIAGEN RNA Isolation Products:

We recommend to denature the samples in a water bath for 2 min at 70°C, and then place them directly on ice prior to loading them onto the Agilent Bioanalyzer.

 

FAQ ID -528
How do I safely inactivate biohazardous flow-through material?

Always dispose of potentially biohazardous solutions according to your institution’s waste-disposal guidelines. Although the lysis and binding buffers in QIAamp, DNeasy, and RNeasy kits contain chaotropic agents that can inactivate some biohazardous material, local regulations dictate the proper way to dispose of biohazards. DO NOT add bleach or acidic solutions directly to the sample-preparation waste. Guanidine hydrochloride in the sample-preparation waste can form highly reactive compounds when combined with bleach.
Please access our Material Safety Data Sheets (MSDS) online for detailed information on the reagents for each respective kit.

FAQ ID -12